Soil Testing Equipment
Our soil & concrete testing machines that we offer are durable and easy to use. These testing machines yield accurate results and can function non stop for hours.
Portable Compression Testing Machine
Request Callback
₹ 45000 / Piece Get Latest Price
Product Brochure
| Automation Grade | Manual |
| Country of Origin | Made in India |
| Capacity | 1000kN |
| Maximum Vertica Clearance | 350mm |
| Maximum Horizontal Clearance | 220mm |
| Piston Diameter | 165mm |
| Piston Stroke | 25mm |
| Paint | Powder Coated |
| Gauge Make | WIKA |
| Calibration | Yes, NABL Extra |
Minimum order quantity: 1 Piece
This test is used to determine the compressive strength of a concrete cube, which has usually been made from fresh concrete cast in a standard test mould. The value of compressive strength can then be used to assess whether the batch that the concrete cube represents meets the required compressive strength. Following cube manufacture and curing, which should both be closely controlled, the cube is crushed at a stated constant speed until it can sustain no further increase in load. The strength is then derived by calculation using the maximum load and cube dimensions.
Capacity: 100 ton, 200 ton, 300 ton.
Various models are available depending on the mode of operation such as Manually operated, Electrically cum Hand operataed, Semi Automatic, Fully Automatic Compression Testing Machine
Capacity: 100 ton, 200 ton, 300 ton.
Various models are available depending on the mode of operation such as Manually operated, Electrically cum Hand operataed, Semi Automatic, Fully Automatic Compression Testing Machine
Digital Compression Testing Machine
Request Callback
₹ 175000 / Set Get Latest Price
Product Brochure
| Display Type | Digital |
| Automation Grade | Semi-Automatic |
| Phase | Three Phase |
| Frequency | 50 hz |
| Power Supply | Electric Motor |
| Brand | SCIENTIFIC |
Compressive Strength Testing Equipment to test cement, brick and concrete is offered by us. The range we offer includes Manually (Hand) Operated, Semi Automatic Compression Testing Equipment, Electrically Cum Manually Operated equipment and more. These strength testing equipment are extremely handy and are easy to use for testing cement, concrete and mortar cubes. We lay utmost importance on equipment design and construct with emphasis on ease of operation. As present day buyers expect more power, speed and highest level of accuracy in material testing system, we continue to offer research based Compressive Strength Testing Equipment of international standard, at affordable prices
Compression Testing Machine
Request Callback
₹ 116820 / Piece Get Latest Price
| Capacity | 1000 kN |
"SCIENTIFIC" 1000 kN (100Tonn) Compression Testing Machine with Electrically Cum Manually Operated Pumping Unit, fitted with Pressure Gauge 0-1000 kN x 5 kN. FOUR PILLER MODEL
Scientific brassTest Sieves
Request Callback
₹ 700 / Piece Get Latest Price
| Usage/Application | Sieveing |
| Brand | SCIENTIFIC |
| Material | Brass |
| Available Size | 1/2 inch,3 inch,5 inch,6 inch |
| Frame | Aluminum |
| Frame Diameter | 4 inch |
| Holes Size | 4.75 to 100mm |
Minimum order quantity: 1 Piece
The frame is made out of spun brass and without any joint in it. A clean rigid design of minimum weight and free from corners where the material could be lodged. Uniform fabrication of our sieves permit easy and smooth-nesting on each others and also with lid and receivers. Imported stainless steel 18/8 quality or phosphor bronze standard sieve cloth is used for better performance and lasting. An essential feature of test sieves is that the mesh should be flat, taut and uniform and with permanent tension round the whole circumference. The same is fully observed in "Scientific" test sieves.
Sieves As Per Is 460
Request Callback
₹ 549 / Piece Get Latest Price
| Frame Material | Jointless Brass,SS & GI |
| Mesh Material | Stainless Steel |
| Mesh Size | 38 microns to 125mm |
| Frame Diameter | 20cm,30cm and 45cm |
| Brand | SCIENTIFIC |
| Finish | Polished Brass,Stainless Steel,GI and GI Powder Coated |
Minimum order quantity: 1 Piece
At SCIENTIFIC every single test sieve is individually manufactured under the most stringent quality control procedures using only the finest materials. We use the most advanced computer scanning techniques to ensure precise test sieve apertures. Our skill and experience ensures you will not only receive a test sieve that looks and feels good, but one that offers a degree of accuracy second to none.
Density Measurement Meter
Request Callback
Get Latest Price
| Usage/Application | Measurement |
| Application | Laboratory, Industrial |
| Material | SS |
| Power | 230V |
| Meter Type | Digital Meter |
Minimum order quantity: 1 Number
Keeping track of customer’s diverse demands; we are involved in providing a wide range of Density Meter. We offer this at nominal costs.
Concrete Cubes Mould 150 Mm
Request Callback
₹ 2250 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Size | 150 mm |
| Shaping Mode Type | Cube |
| Operating Mode | Concrete |
| Shape | Cube |
| Weight | 13kgs |
| Application | Casting Concrete cubes |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
ISI-marked 15 cm cube mould is used for concrete testing, specifically for compressive strength tests of cement and concrete cubes as per IS:10086-1982. Below are the general specifications for an ISI-marked 15 cm cube mould:
Specifications:Material: Cast iron or steelInner Dimensions: 150 mm × 150 mm × 150 mmWall Thickness: Minimum 8 mm (for rigidity and durability)Surface Finish: Smooth, machined inner surfaces for uniform cubesWeight: Approximately 8-12 kg depending on the materialBase Plate: Detachable, rigid, and properly alignedClamping Arrangement: Four clamping screws or quick-release clampsTolerance: ±0.2 mm in internal dimensions as per IS:10086
Specifications:Material: Cast iron or steelInner Dimensions: 150 mm × 150 mm × 150 mmWall Thickness: Minimum 8 mm (for rigidity and durability)Surface Finish: Smooth, machined inner surfaces for uniform cubesWeight: Approximately 8-12 kg depending on the materialBase Plate: Detachable, rigid, and properly alignedClamping Arrangement: Four clamping screws or quick-release clampsTolerance: ±0.2 mm in internal dimensions as per IS:10086
Rear Mount Dial Gauges
Request Callback
Get Latest Price
| Brand | Baker |
| Material | Cast Iron |
| Display Type | Analog |
| Usage/Application | Measurement |
| Shape | Round |
Minimum order quantity: 1 Number
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Pycnometer Bottle 500ml
Request Callback
₹ 750 / Bottle Get Latest Price
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Rapid Moisture Meter
Request Callback
₹ 5000 / Number Get Latest Price
| Warranty | 1 Year |
| Usage/Application | Laboratory |
| Display Type | Analog |
| Automation Grade | Manual |
| Weight | Approx 5 Kg |
| Country of Origin | Made in India |
Minimum order quantity: 1 Number
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Shrinkage Limit Apparatus
Request Callback
₹ 4499 / Unit Get Latest Price
| Material | Steel |
| Brand | SCIENTIFIC |
| Automation Grade | Manual |
| Usage/Application | Moisture Content determination |
| Color | Silver |
| Display Type | Dial gauge |
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Sand Pouring Cylinder Apparatus
Request Callback
₹ 2500 / Unit Get Latest Price
| Color | Black/Blue |
| Automation Grade | Manual |
| Material | Steel |
| Brand | SCIENTIFIC |
| Finishing | Powder Coated |
| Usage/Application | Sand Replacement for Unit Weight Determination |
| Cylinder Inner Diameter | 150mm |
| Size | 150 x 150mm |
Minimum order quantity: 1 Unit
Ref. Standard IS:2720 (Part 28)
This is used for the in-place determination of the dry density of natural or compact soil containing stones, fine, medium grained soils for layer exceeding 15 cm but not exceeding 25cm thickness. It may also be used for measuring the density of base materials. density of base materials.
Brass Brunton Compass
Request Callback
₹ 25000 / Piece Get Latest Price
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Split Spoon Sample
Request Callback
Get Latest Price
| Material | Steel |
| Diameter | 1 inch |
| Automation Grade | Manual |
| Color | Silver |
| Outer Diameter | 8mm |
| Hollow Stem Augers | 4.25 inch |
We offer a range of precision engineered split spoon sampler, that is manufactured using premium qualityraw material procured from reliable vendors of the market. These samplers are used in soil exploration for determining the penetration (n value) for soil by giving a number of blows with a given weight falling through a given distance and by measuring the length of penetration at different depths.
SS Tripod Stand
Request Callback
Get Latest Price
| Packaging Type | Carton Box |
| Material | Stainless Steel |
| Usage/Application | Survey |
| Country of Origin | Made in India |
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument.
These offered ranges are admired in the market for their strong construction and high efficiency.
These offered ranges are admired in the market for their strong construction and high efficiency.
CBR Load Frame
Request Callback
Get Latest Price
| Automation Grade | Automatic |
| Color | White |
| Material | Mild Steel |
Minimum order quantity: 1 Number
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument.
These offered ranges are admired in the market for their strong construction and high efficiency.
These offered ranges are admired in the market for their strong construction and high efficiency.
Large Direct Shear Test
Request Callback
Get Latest Price
Product Brochure
| Material | Steel |
| Color | Silver |
| Usage/Application | Measure Shear Test |
| Automation Grade | Manual |
| Frequency | 1-50 or 1-100 HZ |
| Use | Direct Shear Strength Test |
| Force Range | 5-500kN |
Minimum order quantity: 1 Number
This is a type of test that is used to determine the shear strength properties of a soil. It can simulate the confining pressure a soil would see deep into the ground. It can also simulate drained and un-drained conditions. The soil sample mixed with water is pressed with machine and the load capacity of the soil is measured.
Digital Static Penetrometer
Request Callback
Get Latest Price
Product Brochure
| Material | SS |
| Display Type | Digital Display |
| Diameter | Thita 36 |
| Pulling Speed | 3-4m/min |
| Use | Strength Testing Machine |
The static cone penetrometers can be used to evaluate soil consistency by determining the soil’s level of compaction and/ or the bearing capacity. Especially useful in evaluation shallow foundations and pavement subgrades where fine-grained and soft soils are being used. Can also be used to aid technicians in quickly selecting sites for testing, as well as correlating with other tests, based on local conditions, such as standard or modified Proctor, CBR or Bearing Capacity. Humboldt static cone penetrometers use a dual-rod design, which eliminates the need to correct for soil friction on the rod as the cone is pushed through the material. Available as digital, Analog, Proving Ring Type, and Corps of Engineers Models.
Consolidation Test Apparatus
Request Callback
Get Latest Price
Product Brochure
| Maximum Capacity | 20kg/cm2 |
| Voltage | 230V, 50Hz |
| Testing Diameter | 60mm |
| Thickness | 20mm |
| Power Supply | A.C |
Auto level Consolido meter In the apparatus, the loading lever level is maintained automatically when weights are added to the hanger and as consolidation of the specimen takes place.
Swell Test Apparatus
Request Callback
Get Latest Price
Product Brochure
| Automation Grade | Semi-Automatic |
| Material | Steel |
| Color | Blue |
| Load Capacity | 5 ~ 7 kN |
| Specimen Size | 40mm |
| Side pressure | 0 KPa ~ 1200 KPa |
To fulfill patrons needs and demands in an efficient manner, we bring forth an outstanding range of Swell Test Apparatus, which is manufactured under the experienced guidance of our team members who make sure to strictly follow the industry laid guidelines and standards. Besides, our team makes use of optimum grade raw material to offer a qualitative product array that meets the parameters before final dispatch to the patrons
Some features are:
Some features are:
- Rugged construction
- High speed operations
- Dimensionally accurate
- High tensile strength
- Easy to operate
Hot Air Oven
Request Callback
₹ 15000 / Unit Get Latest Price
| Brand | BTI,Binder,TEMPO |
| Usage/Application | Drying Oven |
| Max Temperature | 250 deg C |
| No of trays | 4.0, 2.0 |
| Body Material | Mild Steel |
| Material | Mild Steel |
| Chamber Size | 12 inch x 12 inch x 12 inch(LxWxH) |
| Rating | 1000W |
| Temperature Range | 50dig C to 250dig C |
| Temperature Resolution | 1dig C |
Minimum order quantity: 1 Unit
Double walled construction inner chamber made of stainless steel/mild steel and exterior made of galvanised sheets and powder coating. The gap between the two walls is filled with glass wool insulation. A fully insulated door with brass lock hinges and aluminum ventilator. Supplied with G.I. wire mesh shelves.
Product Details:
Product Details:
| Chamber Size | Rating | No of shelves |
| 14” x 14” x 14” | 1250W | 2 Nos |
| 18” x 18” x 18” | 1500W | 3 Nos |
| 18” x 18” x 24” | 2200W | 4 Nos |
| 24” x 24” x 24” | 2500W | 4 Nos |
| 24” x 24” x 16” | 3000W | 5 Nos |
Laboratory CBR Apparatus
Request Callback
Get Latest Price
| Brand | SCIENTIFIC |
| Country of Origin | Made in India |
| Material | C.I. |
| Voltage | 220V |
| Frequency | 50 Hz |
| Power Source | Electric |
Minimum order quantity: 1 Number
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument.
These offered ranges are admired in the market for their strong construction and high efficiency.
These offered ranges are admired in the market for their strong construction and high efficiency.
Electromagnetic Sieve Shaker
Request Callback
Get Latest Price
| Sieve Diameter | 400 mm |
| Material | C.I. |
| Color | Grey & Blue |
| Object To Detect | Aggrecate & Sand |
| Function | accurate sieving tests, also on fine materials |
| Country of Origin | Made in India |
We are wholesaler Dealer, Trader, Importer and Exporter of the quality approved assortment of Soil Testing Equipment & Survey Instrument. These offered ranges are admired in the market for their strong construction and high efficiency.
Dynamic Cone Penetration Test Apparatus
Request Callback
Get Latest Price
| Automation Grade | Manual |
| Color | Silver |
| Material | Mild steel |
| Diameter | 50mm |
| Scale Size | 48 inch |
Minimum order quantity: 1 Second
The method helps recon aissance survey of wide area in a short time.In some cases, specially if the depth is great, it may be difficult to pull out the cone after the completion of the test.Hence the cone without threads should be used in the case of deep soundings a sit may be left in the ground.
California Bearing Ratio Test Apparatus
Request Callback
Get Latest Price
| Automation Grade | Semi-Automatic |
| Color | Blue |
| Material | Mild Steel |
| Capacity | 5000 kg |
| Internal Diameter | 150mm |
| Face Diameter | 50mm |
| Slotted Metal Weight | 2.5 kg |
The apparatus comprises a loading machine that operates in a strain-controlled manner and exerts load at a constant rate such that the penetration is 1.25mm per minute.
Cylindrical moulds of 150mm diameter and 175mm height are provided with a collar. The length of the collar is 50mm, and it also has a perforated base which is detachable.
A Compaction rammer and surcharge annular of 2.5kg weight and 147mm diameter are also provided.
Brazilian Test Apparatus
Request Callback
Get Latest Price
| Usage/Application | Laboratory |
| Display Type | Analog |
| Material | Steel |
| Specimens Diameter | 50mm |
| Loading Jack Capacity | 200kN |
| Jaws Diameter | 70mm |
Minimum order quantity: 1 Number
Brazilian Test Apparatus is designed to test specimens from 50 mm dia to 100 mm dia having thickness equal to half of the diameter for determination of Indirect Tensile Strength of rocks.
Field Vane Shear
Request Callback
Get Latest Price
| Material | Stainless Steel |
| Automation Grade | Semi-Automatic |
| Use | Vane shearing test |
| Color | Silver |
| Diameter | 37.5mm |
The torque ring has a section cut from it and deforms as torque is applied and the deformation is indicated by a dial gauge. A pointer is provided for registering the rotation of the cane.A detachable stand is provided to anchor the instrument. An attachment to securely hold the string of rods is provided.
Extractor Frame Universal
Request Callback
Get Latest Price
| Size | 100mm |
| Capacity | 50kN |
| Diameter | 100mm |
| Cylinders Diameter | 150mm |
| Weight | 52 kg |
Consists of four pillars with at least 19 mm thick lower and upper platens. The groove is also provided on the lower platen to insert the core cutter/marshal mould/compaction mould. The upper platen is fitted with ribs and adjustable rod to extract the sample.
Soil Lathe Motorized Bench Mounting Type
Request Callback
Get Latest Price
| Automation Grade | Semi-Automatic |
| Usage/Application | Soil Testing |
| Material | Steel |
| Available Rings Diameter | 38 mm, 50 mm, 75 mm, and 100 mm |
| Speed | 24 RPM |
Minimum order quantity: 1 Number
This instrument is used for preparing soil samples for various tests like Triaxial Test, Unconfined Compression Test etc.
Point Load Index Tester
Request Callback
Get Latest Price
Product Brochure
| Brand | Scientific |
| Material | Steel |
| Color | Blue |
| Display Type | Analog |
| Usage/Application | Load testing |
| Capacity | 100kN |
| Pressure Gauge | 0 - 10000 kg |
Minimum order quantity: 1 Number
We are the leading Manufacture supplier exporter of Point Load Index Tester and offer this product as per client requirements and this product made by our experts with the great quality.
Triaxial Test Outfits
Request Callback
Get Latest Price
| Material | SS |
| Motorised Capacity | 490 kN |
| System Pressure | 150 Bar (150Kg/cm2) |
| Driven Type | Automatic |
| Power | 230V |
We are offering Triaxial Outfit to our clients.
Concrete Permeability Apparatus
Request Callback
Get Latest Price
| Diameter | 150mm |
| Material | Steel |
| Height | 150mm |
| Orientation | India |
| Country of Origin | Made in India |
| Tested Mould | 10mm |
| Approx Diameter | 37.5cm x 1 metre high |
| Water Level | 224.2 Rammer 2.6 kg |
Minimum order quantity: 1 User
We are engaged in manufacturing of Permeability Apparatus.This apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeability.
Digital Pressure Meter
Request Callback
Get Latest Price
| Color | Gren |
| Application | Industrial |
| Material | Plastic |
| Display Type | Digital |
| Pressure Range | 80 Bars |
| Use | Test the pressure |
Minimum order quantity: 1 Number
Keeping in mind the varied requirements of our patrons, we are providing a diverse range of Digital Pressure Meter.
Features:
Features:
- Durable finishing
- Water resistant
- Competitive price
- Longer life service
Compression Testing Machine Portable
Request Callback
₹ 48380 / Piece Get Latest Price
| Capacity | 1000 kN |
"SCIENTIFIC" 1000 kN (100Tonn) Compression Testing Machine Portable, with integral Manually Operated double action Pumping Unit, with Pressure Gauge 0-1000 kN x 5 kN .FOUR PILLER MODEL
X
Product Videos
Compression Testing Machine
Get QuoteSokkia Automatic Levels
Get QuoteContact Us
Inder Dara (CEO)
Scientific Corporation
No. 112, 1st Floor, Ganesh Chambers, Mehadia Square
Dhantoli, Nagpur - 440012, Maharashtra, India
Send Email